Location
Location ANSS
2020/04/16 13:41:29 40.736 -112.062 9.5 4.2 Utah
Focal Mechanism
USGS/SLU Moment Tensor Solution
ENS 2020/04/16 13:41:29:0 40.74 -112.06 9.5 4.2 Utah
Stations used:
GS.UT01 GS.UT02 IE.BCYI IM.PD31 IW.FLWY IW.FXWY IW.LOHW
IW.MFID IW.MOOW IW.SNOW N4.O20A NN.PIO US.AHID US.BW06
US.DUG US.ELK US.HLID US.HWUT UU.BGU UU.BRPU UU.BRWY
UU.BSUT UU.CCUT UU.CTU UU.ECUT UU.HMU UU.HVU UU.KNB UU.LCMT
UU.LIUT UU.MPU UU.MTPU UU.NLU UU.PKCU UU.PNSU UU.PSUT
UU.RDMU UU.SPU UU.SRU UU.SVWY UU.SZCU UU.TCRU UU.TCU
UU.VRUT
Filtering commands used:
cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3
lp c 0.10 n 3
Best Fitting Double Couple
Mo = 1.55e+22 dyne-cm
Mw = 4.06
Z = 11 km
Plane Strike Dip Rake
NP1 324 62 -112
NP2 185 35 -55
Principal Axes:
Axis Value Plunge Azimuth
T 1.55e+22 14 70
N 0.00e+00 19 335
P -1.55e+22 66 195
Moment Tensor: (dyne-cm)
Component Value
Mxx -7.94e+20
Mxy 3.98e+21
Mxz 6.87e+21
Myy 1.27e+22
Myz 4.96e+21
Mzz -1.19e+22
-----#########
------################
######-#####################
######-----###################
#######--------###################
#######------------#################
#######--------------############# #
########----------------########### T ##
#######------------------########## ##
########--------------------##############
#######----------------------#############
#######-----------------------############
#######------------------------###########
#######---------- -----------#########
#######---------- P -----------#########
#######--------- ------------#######
######------------------------######
######-----------------------#####
#####----------------------###
######--------------------##
####------------------
###-----------
Global CMT Convention Moment Tensor:
R T P
-1.19e+22 6.87e+21 -4.96e+21
6.87e+21 -7.94e+20 -3.98e+21
-4.96e+21 -3.98e+21 1.27e+22
Details of the solution is found at
http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20200416134129/index.html
|
Preferred Solution
The preferred solution from an analysis of the surface-wave spectral amplitude radiation pattern, waveform inversion and first motion observations is
STK = 185
DIP = 35
RAKE = -55
MW = 4.06
HS = 11.0
The NDK file is 20200416134129.ndk
The waveform inversion is preferred.
Moment Tensor Comparison
The following compares this source inversion to others
| SLU |
UUSS |
USGS/SLU Moment Tensor Solution
ENS 2020/04/16 13:41:29:0 40.74 -112.06 9.5 4.2 Utah
Stations used:
GS.UT01 GS.UT02 IE.BCYI IM.PD31 IW.FLWY IW.FXWY IW.LOHW
IW.MFID IW.MOOW IW.SNOW N4.O20A NN.PIO US.AHID US.BW06
US.DUG US.ELK US.HLID US.HWUT UU.BGU UU.BRPU UU.BRWY
UU.BSUT UU.CCUT UU.CTU UU.ECUT UU.HMU UU.HVU UU.KNB UU.LCMT
UU.LIUT UU.MPU UU.MTPU UU.NLU UU.PKCU UU.PNSU UU.PSUT
UU.RDMU UU.SPU UU.SRU UU.SVWY UU.SZCU UU.TCRU UU.TCU
UU.VRUT
Filtering commands used:
cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3
lp c 0.10 n 3
Best Fitting Double Couple
Mo = 1.55e+22 dyne-cm
Mw = 4.06
Z = 11 km
Plane Strike Dip Rake
NP1 324 62 -112
NP2 185 35 -55
Principal Axes:
Axis Value Plunge Azimuth
T 1.55e+22 14 70
N 0.00e+00 19 335
P -1.55e+22 66 195
Moment Tensor: (dyne-cm)
Component Value
Mxx -7.94e+20
Mxy 3.98e+21
Mxz 6.87e+21
Myy 1.27e+22
Myz 4.96e+21
Mzz -1.19e+22
-----#########
------################
######-#####################
######-----###################
#######--------###################
#######------------#################
#######--------------############# #
########----------------########### T ##
#######------------------########## ##
########--------------------##############
#######----------------------#############
#######-----------------------############
#######------------------------###########
#######---------- -----------#########
#######---------- P -----------#########
#######--------- ------------#######
######------------------------######
######-----------------------#####
#####----------------------###
######--------------------##
####------------------
###-----------
Global CMT Convention Moment Tensor:
R T P
-1.19e+22 6.87e+21 -4.96e+21
6.87e+21 -7.94e+20 -3.98e+21
-4.96e+21 -3.98e+21 1.27e+22
Details of the solution is found at
http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20200416134129/index.html
|
Moment Tensor (TDMT)
Moment 1.767e+15 N-m
Magnitude 4.10
Depth 9.0 km
Percent DC 92%
Half Duration -
Catalog UU
Data Source UU 2
Contributor UU 2
Nodal Planes
Plane Strike Dip Rake
NP1 191 36 -46
NP2 321 65 -117
Principal Axes
Axis Value Plunge Azimuth
T 1.800e+15 N-m 16 70
N -0.068e+15 N-m 24 333
P -1.732e+15 N-m 61 190
|
Magnitudes
ML Magnitude
(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
Context
The next figure presents the focal mechanism for this earthquake (red) in the context of other events (blue) in the SLU Moment Tensor Catalog which are within ± 0.5 degrees of the new event. This comparison is shown in the left panel of the figure. The right panel shows the inferred direction of maximum compressive stress and the type of faulting (green is strike-slip, red is normal, blue is thrust; oblique is shown by a combination of colors).
Waveform Inversion using wvfgrd96
The focal mechanism was determined using broadband seismic waveforms. The location of the event and the
and stations used for the waveform inversion are shown in the next figure.
|
|
Location of broadband stations used for waveform inversion
|
The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.
The observed and predicted traces are filtered using the following gsac commands:
cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3
lp c 0.10 n 3
The results of this grid search from 0.5 to 19 km depth are as follow:
DEPTH STK DIP RAKE MW FIT
WVFGRD96 1.0 35 85 5 3.52 0.1976
WVFGRD96 2.0 340 40 -95 3.77 0.2648
WVFGRD96 3.0 20 35 -25 3.80 0.2685
WVFGRD96 4.0 195 20 -35 3.86 0.3496
WVFGRD96 5.0 190 25 -45 3.89 0.4334
WVFGRD96 6.0 185 30 -55 3.92 0.5006
WVFGRD96 7.0 185 30 -55 3.94 0.5535
WVFGRD96 8.0 185 30 -55 4.02 0.5941
WVFGRD96 9.0 185 35 -55 4.04 0.6277
WVFGRD96 10.0 185 35 -55 4.05 0.6469
WVFGRD96 11.0 185 35 -55 4.06 0.6529
WVFGRD96 12.0 190 40 -50 4.08 0.6512
WVFGRD96 13.0 190 40 -50 4.09 0.6418
WVFGRD96 14.0 190 40 -50 4.10 0.6267
WVFGRD96 15.0 195 45 -40 4.11 0.6085
WVFGRD96 16.0 195 45 -40 4.11 0.5876
WVFGRD96 17.0 195 45 -40 4.12 0.5641
WVFGRD96 18.0 200 45 -30 4.13 0.5400
WVFGRD96 19.0 200 50 -30 4.14 0.5149
WVFGRD96 20.0 200 35 -30 4.14 0.4959
WVFGRD96 21.0 200 35 -30 4.15 0.4783
WVFGRD96 22.0 200 35 -30 4.15 0.4582
WVFGRD96 23.0 205 35 -20 4.16 0.4393
WVFGRD96 24.0 205 35 -20 4.17 0.4200
WVFGRD96 25.0 205 35 -20 4.17 0.4009
WVFGRD96 26.0 205 35 -20 4.17 0.3814
WVFGRD96 27.0 210 35 -15 4.18 0.3631
WVFGRD96 28.0 210 35 -15 4.18 0.3483
WVFGRD96 29.0 205 35 -20 4.18 0.3345
The best solution is
WVFGRD96 11.0 185 35 -55 4.06 0.6529
The mechanism correspond to the best fit is
|
|
Figure 1. Waveform inversion focal mechanism
|
The best fit as a function of depth is given in the following figure:
|
|
Figure 2. Depth sensitivity for waveform mechanism
|
The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted.
Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect.
A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).
The bandpass filter used in the processing and for the display was
cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3
lp c 0.10 n 3
|
|
Figure 3. Waveform comparison for selected depth. Red: observed; Blue - predicted. The time shift with respect to the model prediction is indicated. The percent of fit is also indicated.
|
|
|
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms.
Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure.
|
A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:
- The origin time and epicentral distance are incorrect
- The velocity model used for the inversion is incorrect
- The velocity model used to define the P-arrival time is not the
same as the velocity model used for the waveform inversion
(assuming that the initial trace alignment is based on the
P arrival time)
Assuming only a mislocation, the time shifts are fit to a functional form:
Time_shift = A + B cos Azimuth + C Sin Azimuth
The time shifts for this inversion lead to the next figure:
The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.
Discussion
Acknowledgements
Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureau of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Oklahoma Geological Survey, TexNet, the Iris stations, the Transportable Array of EarthScope and other networks.
Velocity Model
The WUS.model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:
MODEL.01
Model after 8 iterations
ISOTROPIC
KGS
FLAT EARTH
1-D
CONSTANT VELOCITY
LINE08
LINE09
LINE10
LINE11
H(KM) VP(KM/S) VS(KM/S) RHO(GM/CC) QP QS ETAP ETAS FREFP FREFS
1.9000 3.4065 2.0089 2.2150 0.302E-02 0.679E-02 0.00 0.00 1.00 1.00
6.1000 5.5445 3.2953 2.6089 0.349E-02 0.784E-02 0.00 0.00 1.00 1.00
13.0000 6.2708 3.7396 2.7812 0.212E-02 0.476E-02 0.00 0.00 1.00 1.00
19.0000 6.4075 3.7680 2.8223 0.111E-02 0.249E-02 0.00 0.00 1.00 1.00
0.0000 7.9000 4.6200 3.2760 0.164E-10 0.370E-10 0.00 0.00 1.00 1.00
Quality Control
Here we tabulate the reasons for not using certain digital data sets
The following stations did not have a valid response files:
Last Changed Thu Apr 16 10:29:40 CDT 2020
