USGS/SLU Moment Tensor Solution ENS 2020/04/11 17:57:39:0 44.32 -115.16 13.2 4.3 Idaho Stations used: GS.ID11 IE.BCYI IW.DLMT IW.FLWY IW.FXWY IW.LOHW IW.MFID IW.MOOW IW.PLID IW.SNOW US.AHID US.BMO US.BOZ US.ELK US.HAWA US.HLID US.HWUT US.MSO US.WVOR UU.BGU UU.HVU UU.SPU UW.BRAN UW.WA2 WY.YFT WY.YHB WY.YHL WY.YMR WY.YNE Filtering commands used: cut o DIST/3.3 -40 o DIST/3.3 +50 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.08 n 3 Best Fitting Double Couple Mo = 1.45e+22 dyne-cm Mw = 4.04 Z = 4 km Plane Strike Dip Rake NP1 289 64 -134 NP2 175 50 -35 Principal Axes: Axis Value Plunge Azimuth T 1.45e+22 8 49 N 0.00e+00 39 312 P -1.45e+22 50 149 Moment Tensor: (dyne-cm) Component Value Mxx 1.64e+21 Mxy 9.64e+21 Mxz 7.46e+21 Myy 6.53e+21 Myz -2.10e+21 Mzz -8.16e+21 ----########## ------################ --------#################### --------#################### ---------##################### T # ---------###################### ## -----#####--########################## ##########------------################## ##########----------------############## ###########--------------------########### ###########-----------------------######## ###########-------------------------###### ###########---------------------------#### ###########---------------------------## ###########------------- ------------# ###########------------ P ------------ ##########------------ ----------- ##########------------------------ #########--------------------- ##########------------------ ########-------------- #######------- Global CMT Convention Moment Tensor: R T P -8.16e+21 7.46e+21 2.10e+21 7.46e+21 1.64e+21 -9.64e+21 2.10e+21 -9.64e+21 6.53e+21 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20200411175739/index.html |
STK = 175 DIP = 50 RAKE = -35 MW = 4.04 HS = 4.0
The NDK file is 20200411175739.ndk The waveform inversion is preferred.
The following compares this source inversion to others
USGS/SLU Moment Tensor Solution ENS 2020/04/11 17:57:39:0 44.32 -115.16 13.2 4.3 Idaho Stations used: GS.ID11 IE.BCYI IW.DLMT IW.FLWY IW.FXWY IW.LOHW IW.MFID IW.MOOW IW.PLID IW.SNOW US.AHID US.BMO US.BOZ US.ELK US.HAWA US.HLID US.HWUT US.MSO US.WVOR UU.BGU UU.HVU UU.SPU UW.BRAN UW.WA2 WY.YFT WY.YHB WY.YHL WY.YMR WY.YNE Filtering commands used: cut o DIST/3.3 -40 o DIST/3.3 +50 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.08 n 3 Best Fitting Double Couple Mo = 1.45e+22 dyne-cm Mw = 4.04 Z = 4 km Plane Strike Dip Rake NP1 289 64 -134 NP2 175 50 -35 Principal Axes: Axis Value Plunge Azimuth T 1.45e+22 8 49 N 0.00e+00 39 312 P -1.45e+22 50 149 Moment Tensor: (dyne-cm) Component Value Mxx 1.64e+21 Mxy 9.64e+21 Mxz 7.46e+21 Myy 6.53e+21 Myz -2.10e+21 Mzz -8.16e+21 ----########## ------################ --------#################### --------#################### ---------##################### T # ---------###################### ## -----#####--########################## ##########------------################## ##########----------------############## ###########--------------------########### ###########-----------------------######## ###########-------------------------###### ###########---------------------------#### ###########---------------------------## ###########------------- ------------# ###########------------ P ------------ ##########------------ ----------- ##########------------------------ #########--------------------- ##########------------------ ########-------------- #######------- Global CMT Convention Moment Tensor: R T P -8.16e+21 7.46e+21 2.10e+21 7.46e+21 1.64e+21 -9.64e+21 2.10e+21 -9.64e+21 6.53e+21 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20200411175739/index.html |
(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
|
The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.
The observed and predicted traces are filtered using the following gsac commands:
cut o DIST/3.3 -40 o DIST/3.3 +50 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.08 n 3The results of this grid search from 0.5 to 19 km depth are as follow:
DEPTH STK DIP RAKE MW FIT WVFGRD96 1.0 5 85 -20 3.78 0.3987 WVFGRD96 2.0 185 50 -15 3.94 0.4940 WVFGRD96 3.0 175 45 -40 4.03 0.5830 WVFGRD96 4.0 175 50 -35 4.04 0.6126 WVFGRD96 5.0 180 60 -20 4.03 0.6089 WVFGRD96 6.0 180 65 -20 4.05 0.6071 WVFGRD96 7.0 185 70 -10 4.06 0.6058 WVFGRD96 8.0 180 65 -20 4.10 0.6112 WVFGRD96 9.0 185 70 -10 4.11 0.5937 WVFGRD96 10.0 185 70 -10 4.11 0.5759 WVFGRD96 11.0 190 70 15 4.11 0.5673 WVFGRD96 12.0 190 75 15 4.12 0.5637 WVFGRD96 13.0 190 75 15 4.13 0.5576 WVFGRD96 14.0 190 75 15 4.14 0.5489 WVFGRD96 15.0 190 70 10 4.14 0.5383 WVFGRD96 16.0 190 75 10 4.16 0.5283 WVFGRD96 17.0 195 70 10 4.16 0.5170 WVFGRD96 18.0 190 70 -10 4.18 0.5070 WVFGRD96 19.0 190 70 -10 4.19 0.4985 WVFGRD96 20.0 190 70 -10 4.20 0.4901 WVFGRD96 21.0 190 70 -10 4.21 0.4803 WVFGRD96 22.0 190 65 -10 4.21 0.4708 WVFGRD96 23.0 195 65 10 4.20 0.4613 WVFGRD96 24.0 195 65 10 4.20 0.4520 WVFGRD96 25.0 195 60 5 4.21 0.4420 WVFGRD96 26.0 195 60 5 4.22 0.4330 WVFGRD96 27.0 200 55 10 4.21 0.4236 WVFGRD96 28.0 200 55 10 4.22 0.4147 WVFGRD96 29.0 200 55 10 4.23 0.4052
The best solution is
WVFGRD96 4.0 175 50 -35 4.04 0.6126
The mechanism correspond to the best fit is
|
The best fit as a function of depth is given in the following figure:
|
The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).
The bandpass filter used in the processing and for the display was
cut o DIST/3.3 -40 o DIST/3.3 +50 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.08 n 3
|
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure. |
A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:
Time_shift = A + B cos Azimuth + C Sin Azimuth
The time shifts for this inversion lead to the next figure:
The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.
Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureau of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Oklahoma Geological Survey, TexNet, the Iris stations, the Transportable Array of EarthScope and other networks.
The WUS.model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:
MODEL.01 Model after 8 iterations ISOTROPIC KGS FLAT EARTH 1-D CONSTANT VELOCITY LINE08 LINE09 LINE10 LINE11 H(KM) VP(KM/S) VS(KM/S) RHO(GM/CC) QP QS ETAP ETAS FREFP FREFS 1.9000 3.4065 2.0089 2.2150 0.302E-02 0.679E-02 0.00 0.00 1.00 1.00 6.1000 5.5445 3.2953 2.6089 0.349E-02 0.784E-02 0.00 0.00 1.00 1.00 13.0000 6.2708 3.7396 2.7812 0.212E-02 0.476E-02 0.00 0.00 1.00 1.00 19.0000 6.4075 3.7680 2.8223 0.111E-02 0.249E-02 0.00 0.00 1.00 1.00 0.0000 7.9000 4.6200 3.2760 0.164E-10 0.370E-10 0.00 0.00 1.00 1.00
Here we tabulate the reasons for not using certain digital data sets
The following stations did not have a valid response files: