Location

Location ANSS

2019/06/02 23:08:49 69.522 -144.585 16.8 3.7 Alaska

Focal Mechanism

 USGS/SLU Moment Tensor Solution
 ENS  2019/06/02 23:08:49:0  69.52 -144.59  16.8 3.7 Alaska
 
 Stations used:
   AK.FYU TA.C24K TA.C26K TA.C27K TA.D23K TA.D24K TA.D25K 
   TA.D27M TA.D28M TA.E23K TA.E24K TA.E25K TA.E27K TA.E28M 
   TA.E29M TA.F24K TA.F25K TA.F26K TA.F28M TA.F30M TA.G23K 
   TA.G24K TA.G26K TA.G29M TA.H24K TA.H27K TA.TOLK 
 
 Filtering commands used:
   cut o DIST/3.3 -40 o DIST/3.3 +50
   rtr
   taper w 0.1
   hp c 0.03 n 3 
   lp c 0.07 n 3 
 
 Best Fitting Double Couple
  Mo = 3.76e+21 dyne-cm
  Mw = 3.65 
  Z  = 12 km
  Plane   Strike  Dip  Rake
   NP1      205    85   -25
   NP2      297    65   -174
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   3.76e+21     14     254
    N   0.00e+00     65      14
    P  -3.76e+21     21     158

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx    -2.55e+21
       Mxy     2.08e+21
       Mxz     9.30e+20
       Myy     2.83e+21
       Myz    -1.29e+21
       Mzz    -2.76e+20
                                                     
                                                     
                                                     
                                                     
                     --------------                  
                 -------------------###              
              ---------------------#######           
             ---------------------#########          
           ----------------------############        
          ----------------------##############       
         ################------################      
        #####################-##################     
        #####################----###############     
       #####################--------#############    
       ####################-----------###########    
       ###################--------------#########    
       ##   #############-----------------#######    
        # T #############-------------------####     
        #   ############---------------------###     
         ##############-----------------------#      
          ############------------------------       
           ##########------------------------        
             ########-----------   --------          
              ######------------ P -------           
                 ###------------   ----              
                     --------------                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
 -2.76e+20   9.30e+20   1.29e+21 
  9.30e+20  -2.55e+21  -2.08e+21 
  1.29e+21  -2.08e+21   2.83e+21 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20190602230849/index.html
        

Preferred Solution

The preferred solution from an analysis of the surface-wave spectral amplitude radiation pattern, waveform inversion and first motion observations is

      STK = 205
      DIP = 85
     RAKE = -25
       MW = 3.65
       HS = 12.0

The NDK file is 20190602230849.ndk The waveform inversion is preferred.

Moment Tensor Comparison

The following compares this source inversion to others
SLU
 USGS/SLU Moment Tensor Solution
 ENS  2019/06/02 23:08:49:0  69.52 -144.59  16.8 3.7 Alaska
 
 Stations used:
   AK.FYU TA.C24K TA.C26K TA.C27K TA.D23K TA.D24K TA.D25K 
   TA.D27M TA.D28M TA.E23K TA.E24K TA.E25K TA.E27K TA.E28M 
   TA.E29M TA.F24K TA.F25K TA.F26K TA.F28M TA.F30M TA.G23K 
   TA.G24K TA.G26K TA.G29M TA.H24K TA.H27K TA.TOLK 
 
 Filtering commands used:
   cut o DIST/3.3 -40 o DIST/3.3 +50
   rtr
   taper w 0.1
   hp c 0.03 n 3 
   lp c 0.07 n 3 
 
 Best Fitting Double Couple
  Mo = 3.76e+21 dyne-cm
  Mw = 3.65 
  Z  = 12 km
  Plane   Strike  Dip  Rake
   NP1      205    85   -25
   NP2      297    65   -174
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   3.76e+21     14     254
    N   0.00e+00     65      14
    P  -3.76e+21     21     158

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx    -2.55e+21
       Mxy     2.08e+21
       Mxz     9.30e+20
       Myy     2.83e+21
       Myz    -1.29e+21
       Mzz    -2.76e+20
                                                     
                                                     
                                                     
                                                     
                     --------------                  
                 -------------------###              
              ---------------------#######           
             ---------------------#########          
           ----------------------############        
          ----------------------##############       
         ################------################      
        #####################-##################     
        #####################----###############     
       #####################--------#############    
       ####################-----------###########    
       ###################--------------#########    
       ##   #############-----------------#######    
        # T #############-------------------####     
        #   ############---------------------###     
         ##############-----------------------#      
          ############------------------------       
           ##########------------------------        
             ########-----------   --------          
              ######------------ P -------           
                 ###------------   ----              
                     --------------                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
 -2.76e+20   9.30e+20   1.29e+21 
  9.30e+20  -2.55e+21  -2.08e+21 
  1.29e+21  -2.08e+21   2.83e+21 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20190602230849/index.html
	

Magnitudes

Context

The next figure presents the focal mechanism for this earthquake (red) in the context of other events (blue) in the SLU Moment Tensor Catalog which are within ± 0.5 degrees of the new event. This comparison is shown in the left panel of the figure. The right panel shows the inferred direction of maximum compressive stress and the type of faulting (green is strike-slip, red is normal, blue is thrust; oblique is shown by a combination of colors).

Waveform Inversion using wvfgrd96

The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
Location of broadband stations used for waveform inversion

The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.

The observed and predicted traces are filtered using the following gsac commands:

cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3 
lp c 0.07 n 3 
The results of this grid search from 0.5 to 19 km depth are as follow:

           DEPTH  STK   DIP  RAKE   MW    FIT
WVFGRD96    1.0   115    90   -20   3.26 0.3216
WVFGRD96    2.0   110    65   -15   3.37 0.3911
WVFGRD96    3.0   110    85   -35   3.43 0.4162
WVFGRD96    4.0   295    50     0   3.48 0.4504
WVFGRD96    5.0   295    50     0   3.50 0.4797
WVFGRD96    6.0   295    55     0   3.52 0.5024
WVFGRD96    7.0   205    80   -30   3.54 0.5314
WVFGRD96    8.0   200    75   -35   3.59 0.5614
WVFGRD96    9.0   200    75   -30   3.61 0.5814
WVFGRD96   10.0   200    75   -30   3.62 0.5936
WVFGRD96   11.0   200    75   -25   3.63 0.5997
WVFGRD96   12.0   205    85   -25   3.65 0.6009
WVFGRD96   13.0   200    80   -25   3.66 0.5993
WVFGRD96   14.0   200    80   -25   3.67 0.5954
WVFGRD96   15.0   200    80   -20   3.67 0.5878
WVFGRD96   16.0   200    80   -20   3.68 0.5776
WVFGRD96   17.0   200    80   -20   3.69 0.5646
WVFGRD96   18.0   200    80   -20   3.70 0.5501
WVFGRD96   19.0   200    80   -20   3.70 0.5341
WVFGRD96   20.0   200    80   -20   3.71 0.5178
WVFGRD96   21.0    15    70   -20   3.70 0.5046
WVFGRD96   22.0    15    70   -20   3.70 0.4921
WVFGRD96   23.0    15    70   -20   3.70 0.4789
WVFGRD96   24.0    15    70   -20   3.71 0.4663
WVFGRD96   25.0    15    70   -20   3.71 0.4539
WVFGRD96   26.0    15    70   -20   3.72 0.4423
WVFGRD96   27.0    20    75   -15   3.73 0.4312
WVFGRD96   28.0    20    70   -10   3.74 0.4218
WVFGRD96   29.0    20    70   -10   3.75 0.4137

The best solution is

WVFGRD96   12.0   205    85   -25   3.65 0.6009

The mechanism correspond to the best fit is
Figure 1. Waveform inversion focal mechanism

The best fit as a function of depth is given in the following figure:

Figure 2. Depth sensitivity for waveform mechanism

The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).

The bandpass filter used in the processing and for the display was

cut o DIST/3.3 -40 o DIST/3.3 +50
rtr
taper w 0.1
hp c 0.03 n 3 
lp c 0.07 n 3 
Figure 3. Waveform comparison for selected depth. Red: observed; Blue - predicted. The time shift with respect to the model prediction is indicated. The percent of fit is also indicated.
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure.

A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:

Assuming only a mislocation, the time shifts are fit to a functional form:

 Time_shift = A + B cos Azimuth + C Sin Azimuth

The time shifts for this inversion lead to the next figure:

The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.

Discussion

Acknowledgements

Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureas of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Iris stations and the Transportable Array of EarthScope.

Velocity Model

The WUS.model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:

MODEL.01
Model after     8 iterations
ISOTROPIC
KGS
FLAT EARTH
1-D
CONSTANT VELOCITY
LINE08
LINE09
LINE10
LINE11
      H(KM)   VP(KM/S)   VS(KM/S) RHO(GM/CC)         QP         QS       ETAP       ETAS      FREFP      FREFS
     1.9000     3.4065     2.0089     2.2150  0.302E-02  0.679E-02   0.00       0.00       1.00       1.00    
     6.1000     5.5445     3.2953     2.6089  0.349E-02  0.784E-02   0.00       0.00       1.00       1.00    
    13.0000     6.2708     3.7396     2.7812  0.212E-02  0.476E-02   0.00       0.00       1.00       1.00    
    19.0000     6.4075     3.7680     2.8223  0.111E-02  0.249E-02   0.00       0.00       1.00       1.00    
     0.0000     7.9000     4.6200     3.2760  0.164E-10  0.370E-10   0.00       0.00       1.00       1.00    

Quality Control

Here we tabulate the reasons for not using certain digital data sets

The following stations did not have a valid response files:

Last Changed Sun Jun 2 21:59:53 CDT 2019