Teleseismic P- and S-wave Geometrical Spreading
Langston and Helmberger (1975) proposed a simple technique to determine the earthquake size, depth and faulting parameters from an analysis of the contribution of P, pP and sP to the observed teleseismic signal immediately following P. They used a simple halfspace model for the source and receiver crusts and required a geometrical spreading and T* attenuation parameter to propagate the signal from the source region to the receiver.
We follow Bullen and the
Herrmann class notes
http://www.eas.slu.edu/People/RBHerrmann/Courses/EASA462/
for Ass14.pdf
The geometrical spreading is dimensionless and gives the
decrease in amplitude from a distance of 1 km from the
source to the receiver
2 2
( a sin Is Vs d T )
sqrt | ------------------------ ----- |
| 2 2 |
( sin DEG cos Ir Rs Cos Is Rr d DEL )
a = radius of sphere about source - we use 1.0 km
Is= incident angle at source
Ir= incident angle at receiver
Rs= distance from center of Earth to source
Rr= distance from center of Earth to receiver
DEG=epicental distance in degrees
DEL=distance in radians
Note that the second derivative divided by Rr^2 is sec/km^2 - which we
can get from dp/dx where dp is in sec/km and dx is the distance in km,
so we compute
2 2
( a sin Is Vs d T )
sqrt | ------------------------ ----- |
| 2 |
( sin DEG cos Ir Rs Cos Is dx )
The only imperfection is the numerical computation of dp/dD
This description describes is a function of the ratio of ray tube
areas at the receiver to the source. Aki and Richards (199?)
and others note that a consideration of wave dynamics requires this
relation to be modified by the following term
( Density (source) Wave velocity (source)
)
sqrt | ----------------------
------------------------------ |
( Density(receiver) Wave velocity (receiver) )
When
considering the composite effect of P, pP and sP, the wave
velocities are both that of the P wave.
The script DOIT
requires the use of AK135-f
in the Computer Programs in Seismology model format ( tak135sph.mod
)
Assuming that the program time96 in in your PATH,
entering the command DOIT yields the following:
--------------------------------------------------
Phase P
DEG HS T(s) p(s/deg) Geom T*(sec)
--------------------------------------------------
30.0 10.0 368.48 8.787 7.115e-05 1.15
32.5 10.0 390.45 8.787 6.531e-05 1.18
35.0 10.0 412.18 8.644 6.056e-05 1.19
37.5 10.0 433.56 8.502 7.408e-05 1.20
40.0 10.0 454.56 8.363 7.045e-05 1.22
42.5 10.0 475.11 8.096 6.622e-05 1.22
45.0 10.0 495.22 7.967 6.889e-05 1.24
50.0 10.0 534.11 7.595 6.187e-05 1.27
55.0 10.0 571.18 7.247 5.624e-05 1.31
60.0 10.0 606.44 6.916 5.552e-05 1.35
65.0 10.0 639.85 6.501 5.422e-05 1.39
70.0 10.0 671.47 6.108 4.986e-05 1.43
75.0 10.0 701.28 5.733 4.625e-05 1.48
80.0 10.0 729.24 5.373 4.325e-05 1.53
85.0 10.0 755.32 5.024 4.072e-05 1.58
90.0 10.0 779.45 4.685 3.255e-05 1.63
--------------------------------------------------
Phase pP
DEG HS T(s) p(s/deg) Geom T*(sec)
--------------------------------------------------
30.0 10.0 371.54 8.952 7.225e-05 1.18
32.5 10.0 393.51 8.787 6.531e-05 1.19
35.0 10.0 415.26 8.644 7.135e-05 1.20
37.5 10.0 436.65 8.502 7.408e-05 1.21
40.0 10.0 457.66 8.363 7.045e-05 1.23
42.5 10.0 478.23 8.096 6.622e-05 1.24
45.0 10.0 498.35 7.967 6.889e-05 1.25
50.0 10.0 537.28 7.595 6.187e-05 1.29
55.0 10.0 574.38 7.247 5.624e-05 1.32
60.0 10.0 609.65 6.916 5.552e-05 1.36
65.0 10.0 643.09 6.501 5.422e-05 1.40
70.0 10.0 674.74 6.108 4.676e-05 1.45
75.0 10.0 704.57 5.825 4.671e-05 1.49
80.0 10.0 732.55 5.373 4.598e-05 1.54
85.0 10.0 758.65 5.024 4.072e-05 1.59
90.0 10.0 782.80 4.685 3.255e-05 1.64
--------------------------------------------------
Phase sP
DEG HS T(s) p(s/deg) Geom T*(sec)
--------------------------------------------------
30.0 10.0 372.79 8.952 7.225e-05 1.20
32.5 10.0 394.76 8.787 6.531e-05 1.20
35.0 10.0 416.51 8.644 7.135e-05 1.21
37.5 10.0 437.90 8.502 7.408e-05 1.23
40.0 10.0 458.90 8.363 7.045e-05 1.24
42.5 10.0 479.47 8.096 6.622e-05 1.25
45.0 10.0 499.59 7.967 6.889e-05 1.27
50.0 10.0 538.50 7.595 6.187e-05 1.30
55.0 10.0 575.60 7.247 5.624e-05 1.34
60.0 10.0 610.87 6.916 5.552e-05 1.38
65.0 10.0 644.30 6.501 5.422e-05 1.41
70.0 10.0 675.94 6.108 4.676e-05 1.46
75.0 10.0 705.77 5.825 4.671e-05 1.51
80.0 10.0 733.74 5.373 4.598e-05 1.55
85.0 10.0 759.84 5.024 4.072e-05 1.60
90.0 10.0 783.98 4.685 3.255e-05 1.65