USGS/SLU Moment Tensor Solution ENS 2018/01/18 05:55:12:0 38.79 -122.75 0.4 4.2 California Stations used: BK.BRK BK.CVS BK.DCMP BK.FARB BK.HOPS BK.JRSC BK.MHC BK.MNRC BK.PETY BK.VAK BK.WENL GM.AA12 NC.KCPB NC.KHBB NC.KMPB NC.KMR NN.BEK NN.CTC NN.MPK NN.PAH NN.WDEM NP.DIX Filtering commands used: cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.10 n 3 Best Fitting Double Couple Mo = 4.22e+22 dyne-cm Mw = 4.35 Z = 8 km Plane Strike Dip Rake NP1 335 67 -136 NP2 225 50 -30 Principal Axes: Axis Value Plunge Azimuth T 4.22e+22 11 96 N 0.00e+00 42 357 P -4.22e+22 46 198 Moment Tensor: (dyne-cm) Component Value Mxx -1.76e+22 Mxy -1.04e+22 Mxz 1.92e+22 Myy 3.84e+22 Myz 1.40e+22 Mzz -2.08e+22 -------------- #####----------------- ##########------------------ #############-----############ ################################## ##############-----################# #############--------################# ############-----------################# ###########-------------################ ##########----------------################ #########------------------############### ########--------------------########## # #######---------------------########## T # ######----------------------######### #####-----------------------############ ####---------- -----------########## ###---------- P -----------######### ##---------- -----------######## ------------------------###### -----------------------##### --------------------## -------------- Global CMT Convention Moment Tensor: R T P -2.08e+22 1.92e+22 -1.40e+22 1.92e+22 -1.76e+22 1.04e+22 -1.40e+22 1.04e+22 3.84e+22 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20180118055512/index.html |
STK = 225 DIP = 50 RAKE = -30 MW = 4.35 HS = 8.0
The NDK file is 20180118055512.ndk The waveform inversion is preferred.
The following compares this source inversion to others
USGS/SLU Moment Tensor Solution ENS 2018/01/18 05:55:12:0 38.79 -122.75 0.4 4.2 California Stations used: BK.BRK BK.CVS BK.DCMP BK.FARB BK.HOPS BK.JRSC BK.MHC BK.MNRC BK.PETY BK.VAK BK.WENL GM.AA12 NC.KCPB NC.KHBB NC.KMPB NC.KMR NN.BEK NN.CTC NN.MPK NN.PAH NN.WDEM NP.DIX Filtering commands used: cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.10 n 3 Best Fitting Double Couple Mo = 4.22e+22 dyne-cm Mw = 4.35 Z = 8 km Plane Strike Dip Rake NP1 335 67 -136 NP2 225 50 -30 Principal Axes: Axis Value Plunge Azimuth T 4.22e+22 11 96 N 0.00e+00 42 357 P -4.22e+22 46 198 Moment Tensor: (dyne-cm) Component Value Mxx -1.76e+22 Mxy -1.04e+22 Mxz 1.92e+22 Myy 3.84e+22 Myz 1.40e+22 Mzz -2.08e+22 -------------- #####----------------- ##########------------------ #############-----############ ################################## ##############-----################# #############--------################# ############-----------################# ###########-------------################ ##########----------------################ #########------------------############### ########--------------------########## # #######---------------------########## T # ######----------------------######### #####-----------------------############ ####---------- -----------########## ###---------- P -----------######### ##---------- -----------######## ------------------------###### -----------------------##### --------------------## -------------- Global CMT Convention Moment Tensor: R T P -2.08e+22 1.92e+22 -1.40e+22 1.92e+22 -1.76e+22 1.04e+22 -1.40e+22 1.04e+22 3.84e+22 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20180118055512/index.html |
Moment Tensor (Mw) Moment 2.748e+15 N-m Magnitude 4.2 Mw Depth 5.0 km Percent DC 41 % Half Duration – Catalog NC Data Source NC2 Contributor NC2 Nodal Planes Plane Strike Dip Rake NP1 222 42 -54 NP2 359 57 -117 Principal Axes Axis Value Plunge Azimuth T 3.086e+15 N-m 8 108 N -0.903e+15 N-m 23 14 P -2.182e+15 N-m 66 217 |
(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
|
The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.
The observed and predicted traces are filtered using the following gsac commands:
cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.10 n 3The results of this grid search from 0.5 to 19 km depth are as follow:
DEPTH STK DIP RAKE MW FIT WVFGRD96 1.0 230 50 -40 3.96 0.3103 WVFGRD96 2.0 225 50 -45 4.13 0.4111 WVFGRD96 3.0 225 50 -45 4.18 0.4401 WVFGRD96 4.0 230 55 -30 4.19 0.4678 WVFGRD96 5.0 230 55 -25 4.22 0.4846 WVFGRD96 6.0 230 50 -25 4.26 0.4957 WVFGRD96 7.0 230 55 -25 4.28 0.5067 WVFGRD96 8.0 225 50 -30 4.35 0.5144 WVFGRD96 9.0 230 55 -25 4.35 0.5123 WVFGRD96 10.0 225 55 -25 4.38 0.5068 WVFGRD96 11.0 230 60 -20 4.38 0.5013 WVFGRD96 12.0 230 60 -20 4.40 0.4941 WVFGRD96 13.0 225 60 -20 4.43 0.4853 WVFGRD96 14.0 230 70 -20 4.42 0.4767 WVFGRD96 15.0 230 70 -20 4.43 0.4690 WVFGRD96 16.0 230 70 -20 4.44 0.4596 WVFGRD96 17.0 230 75 -20 4.45 0.4499 WVFGRD96 18.0 235 65 -20 4.46 0.4423 WVFGRD96 19.0 235 65 -20 4.47 0.4353 WVFGRD96 20.0 235 65 -20 4.47 0.4272 WVFGRD96 21.0 235 65 -25 4.48 0.4202 WVFGRD96 22.0 235 65 -25 4.49 0.4116 WVFGRD96 23.0 235 65 -25 4.49 0.4032 WVFGRD96 24.0 235 65 -25 4.50 0.3936 WVFGRD96 25.0 235 65 -25 4.50 0.3853 WVFGRD96 26.0 325 65 30 4.53 0.3793 WVFGRD96 27.0 330 60 30 4.53 0.3788 WVFGRD96 28.0 330 60 30 4.53 0.3777 WVFGRD96 29.0 330 60 30 4.53 0.3777
The best solution is
WVFGRD96 8.0 225 50 -30 4.35 0.5144
The mechanism correspond to the best fit is
|
The best fit as a function of depth is given in the following figure:
|
The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).
The bandpass filter used in the processing and for the display was
cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.10 n 3
|
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure. |
A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:
Time_shift = A + B cos Azimuth + C Sin Azimuth
The time shifts for this inversion lead to the next figure:
The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.
Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureas of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Iris stations and the Transportable Array of EarthScope.
The WUS.model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:
MODEL.01 Model after 8 iterations ISOTROPIC KGS FLAT EARTH 1-D CONSTANT VELOCITY LINE08 LINE09 LINE10 LINE11 H(KM) VP(KM/S) VS(KM/S) RHO(GM/CC) QP QS ETAP ETAS FREFP FREFS 1.9000 3.4065 2.0089 2.2150 0.302E-02 0.679E-02 0.00 0.00 1.00 1.00 6.1000 5.5445 3.2953 2.6089 0.349E-02 0.784E-02 0.00 0.00 1.00 1.00 13.0000 6.2708 3.7396 2.7812 0.212E-02 0.476E-02 0.00 0.00 1.00 1.00 19.0000 6.4075 3.7680 2.8223 0.111E-02 0.249E-02 0.00 0.00 1.00 1.00 0.0000 7.9000 4.6200 3.2760 0.164E-10 0.370E-10 0.00 0.00 1.00 1.00
Here we tabulate the reasons for not using certain digital data sets
The following stations did not have a valid response files: