Location

2016/02/20 06:13:20 34.610 -116.629 7.6 4.3 California

Arrival Times (from USGS)

Arrival time list

Felt Map

USGS Felt map for this earthquake

USGS Felt reports main page

Focal Mechanism

 USGS/SLU Moment Tensor Solution
 ENS  2016/02/20 06:13:20:0  34.61 -116.63   7.6 4.3 California
 
 Stations used:
   BC.CCX BC.RMX BC.TJX BC.TKX CI.BAR CI.BCW CI.CCA CI.ELS2 
   CI.GLA CI.GSC CI.ISA CI.LDF CI.PASC CI.PMD CI.RAG CI.YUH2 
   II.PFO IM.NV31 NN.GWY NN.KVN NN.LCH NN.LHV NN.PRN NN.Q09A 
   NN.QSM NN.RYN NN.S11A NN.SHP NN.SPR3 NN.YER TA.109C TA.214A 
   TA.R11A US.TPNV US.WUAZ UU.CCUT UU.KNB UU.LCMT UU.PKCU 
   UU.PSUT UU.SZCU UU.VRUT 
 
 Filtering commands used:
   cut o DIST/3.3 -30 o DIST/3.3 +70
   rtr
   taper w 0.1
   hp c 0.02 n 3 
   lp c 0.10 n 3 
 
 Best Fitting Double Couple
  Mo = 2.99e+22 dyne-cm
  Mw = 4.25 
  Z  = 14 km
  Plane   Strike  Dip  Rake
   NP1       75    65    35
   NP2      329    59   150
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   2.99e+22     42     294
    N   0.00e+00     48     106
    P  -2.99e+22      4     200

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx    -2.33e+22
       Mxy    -1.59e+22
       Mxz     7.96e+21
       Myy     1.02e+22
       Myz    -1.28e+22
       Mzz     1.31e+22
                                                     
                                                     
                                                     
                                                     
                     --------------                  
                 #---------------------              
              #########-------------------           
             #############-----------------          
           #################-----------------        
          ####################----------------       
         #######################---------------      
        ########   ##############---------------     
        ######## T ###############--------------     
       #########   #################----------###    
       ##############################-------#####    
       ##############################-----#######    
       ##########################################    
        ##########################-----#########     
        ---#################-----------#########     
         ------------------------------########      
          ------------------------------######       
           -----------------------------#####        
             ---------------------------###          
              -------------------------###           
                 ---   ----------------              
                     P ------------                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
  1.31e+22   7.96e+21   1.28e+22 
  7.96e+21  -2.33e+22   1.59e+22 
  1.28e+22   1.59e+22   1.02e+22 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20160220061320/index.html
        

Preferred Solution

The preferred solution from an analysis of the surface-wave spectral amplitude radiation pattern, waveform inversion and first motion observations is

      STK = 75
      DIP = 65
     RAKE = 35
       MW = 4.25
       HS = 14.0

The NDK file is 20160220061320.ndk The waveform inversion is preferred.

Moment Tensor Comparison

The following compares this source inversion to others
SLU
SCAL
 USGS/SLU Moment Tensor Solution
 ENS  2016/02/20 06:13:20:0  34.61 -116.63   7.6 4.3 California
 
 Stations used:
   BC.CCX BC.RMX BC.TJX BC.TKX CI.BAR CI.BCW CI.CCA CI.ELS2 
   CI.GLA CI.GSC CI.ISA CI.LDF CI.PASC CI.PMD CI.RAG CI.YUH2 
   II.PFO IM.NV31 NN.GWY NN.KVN NN.LCH NN.LHV NN.PRN NN.Q09A 
   NN.QSM NN.RYN NN.S11A NN.SHP NN.SPR3 NN.YER TA.109C TA.214A 
   TA.R11A US.TPNV US.WUAZ UU.CCUT UU.KNB UU.LCMT UU.PKCU 
   UU.PSUT UU.SZCU UU.VRUT 
 
 Filtering commands used:
   cut o DIST/3.3 -30 o DIST/3.3 +70
   rtr
   taper w 0.1
   hp c 0.02 n 3 
   lp c 0.10 n 3 
 
 Best Fitting Double Couple
  Mo = 2.99e+22 dyne-cm
  Mw = 4.25 
  Z  = 14 km
  Plane   Strike  Dip  Rake
   NP1       75    65    35
   NP2      329    59   150
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   2.99e+22     42     294
    N   0.00e+00     48     106
    P  -2.99e+22      4     200

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx    -2.33e+22
       Mxy    -1.59e+22
       Mxz     7.96e+21
       Myy     1.02e+22
       Myz    -1.28e+22
       Mzz     1.31e+22
                                                     
                                                     
                                                     
                                                     
                     --------------                  
                 #---------------------              
              #########-------------------           
             #############-----------------          
           #################-----------------        
          ####################----------------       
         #######################---------------      
        ########   ##############---------------     
        ######## T ###############--------------     
       #########   #################----------###    
       ##############################-------#####    
       ##############################-----#######    
       ##########################################    
        ##########################-----#########     
        ---#################-----------#########     
         ------------------------------########      
          ------------------------------######       
           -----------------------------#####        
             ---------------------------###          
              -------------------------###           
                 ---   ----------------              
                     P ------------                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
  1.31e+22   7.96e+21   1.28e+22 
  7.96e+21  -2.33e+22   1.59e+22 
  1.28e+22   1.59e+22   1.02e+22 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20160220061320/index.html
	
TMTS
Moment	3.541e+15 N-m
Magnitude	4.30
Depth	14.0 km
Percent DC	59%
Half Duration	–
Catalog	CI (ci37526424)
Data Source	CI2
Contributor	CI2
Nodal Planes
Plane	Strike	Dip	Rake
NP1	325	52	140
NP2	82	60	45
Principal Axes
Axis	Value	Plunge	Azimuth
T	3.076	52	297
N	0.795	37	109
P	-3.871	4	202

        

Magnitudes

ML Magnitude


(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.


(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.

Context

The next figure presents the focal mechanism for this earthquake (red) in the context of other events (blue) in the SLU Moment Tensor Catalog which are within ± 0.5 degrees of the new event. This comparison is shown in the left panel of the figure. The right panel shows the inferred direction of maximum compressive stress and the type of faulting (green is strike-slip, red is normal, blue is thrust; oblique is shown by a combination of colors).

Waveform Inversion

The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
Location of broadband stations used for waveform inversion

The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.

The observed and predicted traces are filtered using the following gsac commands:

cut o DIST/3.3 -30 o DIST/3.3 +70
rtr
taper w 0.1
hp c 0.02 n 3 
lp c 0.10 n 3 
The results of this grid search from 0.5 to 19 km depth are as follow:

           DEPTH  STK   DIP  RAKE   MW    FIT
WVFGRD96    1.0    50    90     0   3.76 0.2886
WVFGRD96    2.0   110    50    85   3.95 0.3606
WVFGRD96    3.0    60    90    40   3.94 0.3597
WVFGRD96    4.0    70    80    45   3.98 0.3998
WVFGRD96    5.0    70    80    40   4.00 0.4357
WVFGRD96    6.0    60    65   -40   4.04 0.4718
WVFGRD96    7.0    60    65   -35   4.07 0.5095
WVFGRD96    8.0    55    60   -45   4.14 0.5351
WVFGRD96    9.0    55    55   -45   4.17 0.5653
WVFGRD96   10.0    80    65    40   4.17 0.5856
WVFGRD96   11.0    85    60    40   4.19 0.6075
WVFGRD96   12.0    80    60    40   4.22 0.6220
WVFGRD96   13.0    80    60    40   4.23 0.6295
WVFGRD96   14.0    75    65    35   4.25 0.6326
WVFGRD96   15.0    75    65    35   4.26 0.6308
WVFGRD96   16.0    75    65    35   4.27 0.6247
WVFGRD96   17.0    75    65    35   4.28 0.6151
WVFGRD96   18.0    75    70    35   4.29 0.6034
WVFGRD96   19.0    75    70    35   4.30 0.5900
WVFGRD96   20.0    75    70    35   4.30 0.5748
WVFGRD96   21.0    75    70    35   4.31 0.5583
WVFGRD96   22.0    75    70    35   4.32 0.5420
WVFGRD96   23.0    75    70    35   4.32 0.5253
WVFGRD96   24.0    75    70    35   4.33 0.5088
WVFGRD96   25.0    75    70    35   4.33 0.4930
WVFGRD96   26.0    75    70    35   4.33 0.4786
WVFGRD96   27.0    75    70    35   4.34 0.4653
WVFGRD96   28.0    75    70    35   4.34 0.4521
WVFGRD96   29.0    75    65    35   4.35 0.4399

The best solution is

WVFGRD96   14.0    75    65    35   4.25 0.6326

The mechanism correspond to the best fit is
Figure 1. Waveform inversion focal mechanism

The best fit as a function of depth is given in the following figure:

Figure 2. Depth sensitivity for waveform mechanism

The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).

The bandpass filter used in the processing and for the display was

cut o DIST/3.3 -30 o DIST/3.3 +70
rtr
taper w 0.1
hp c 0.02 n 3 
lp c 0.10 n 3 
Figure 3. Waveform comparison for selected depth. Red: observed; Blue - predicted. The time shift with respect to the model prediction is indicated. The percent of fit is also indicated.
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure.

A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:

Assuming only a mislocation, the time shifts are fit to a functional form:

 Time_shift = A + B cos Azimuth + C Sin Azimuth

The time shifts for this inversion lead to the next figure:

The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.

Discussion

Acknowledgements

Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureas of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Iris stations and the Transportable Array of EarthScope.

Velocity Model

The WUS.model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:

MODEL.01
Model after     8 iterations
ISOTROPIC
KGS
FLAT EARTH
1-D
CONSTANT VELOCITY
LINE08
LINE09
LINE10
LINE11
      H(KM)   VP(KM/S)   VS(KM/S) RHO(GM/CC)         QP         QS       ETAP       ETAS      FREFP      FREFS
     1.9000     3.4065     2.0089     2.2150  0.302E-02  0.679E-02   0.00       0.00       1.00       1.00    
     6.1000     5.5445     3.2953     2.6089  0.349E-02  0.784E-02   0.00       0.00       1.00       1.00    
    13.0000     6.2708     3.7396     2.7812  0.212E-02  0.476E-02   0.00       0.00       1.00       1.00    
    19.0000     6.4075     3.7680     2.8223  0.111E-02  0.249E-02   0.00       0.00       1.00       1.00    
     0.0000     7.9000     4.6200     3.2760  0.164E-10  0.370E-10   0.00       0.00       1.00       1.00    

Quality Control

Here we tabulate the reasons for not using certain digital data sets

The following stations did not have a valid response files:

Last Changed Sat Feb 20 09:27:45 CST 2016