2015/05/30 11:21:40 37.035 -97.913 5.0 3.8 Kansas
USGS Felt map for this earthquake
USGS/SLU Moment Tensor Solution ENS 2015/05/30 11:21:40:0 37.03 -97.91 5.0 3.8 Kansas Stations used: GS.KAN01 GS.KAN10 GS.KAN11 GS.KAN12 GS.KAN13 GS.KAN16 GS.OK025 GS.OK029 GS.OK030 GS.OK031 GS.OK032 N4.R32B N4.S39B N4.T35B OK.BCOK OK.CROK OK.FNO OK.U32A OK.W35A OK.X37A US.CBKS US.KSU1 Filtering commands used: cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.07 n 3 Best Fitting Double Couple Mo = 5.13e+21 dyne-cm Mw = 3.74 Z = 3 km Plane Strike Dip Rake NP1 60 57 -123 NP2 290 45 -50 Principal Axes: Axis Value Plunge Azimuth T 5.13e+21 7 173 N 0.00e+00 27 79 P -5.13e+21 62 276 Moment Tensor: (dyne-cm) Component Value Mxx 4.97e+21 Mxy -5.23e+20 Mxz -7.97e+20 Myy -1.04e+21 Myz 2.19e+21 Mzz -3.93e+21 ############## ###################### ############################ ############################## ########-------################### ###--------------------############# #---------------------------#########- -------------------------------######--- ---------------------------------###---- ------------ --------------------------- ------------ P --------------------###---- ------------ ------------------######--- -------------------------------########--- ----------------------------###########- -------------------------##############- ---------------------################# ---------------##################### ################################## ############################## ############################ ############ ####### ######## T ### Global CMT Convention Moment Tensor: R T P -3.93e+21 -7.97e+20 -2.19e+21 -7.97e+20 4.97e+21 5.23e+20 -2.19e+21 5.23e+20 -1.04e+21 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20150530112140/index.html |
STK = 290 DIP = 45 RAKE = -50 MW = 3.74 HS = 3.0
The NDK file is 20150530112140.ndk The waveform inversion is preferred.
The following compares this source inversion to others
USGS/SLU Moment Tensor Solution ENS 2015/05/30 11:21:40:0 37.03 -97.91 5.0 3.8 Kansas Stations used: GS.KAN01 GS.KAN10 GS.KAN11 GS.KAN12 GS.KAN13 GS.KAN16 GS.OK025 GS.OK029 GS.OK030 GS.OK031 GS.OK032 N4.R32B N4.S39B N4.T35B OK.BCOK OK.CROK OK.FNO OK.U32A OK.W35A OK.X37A US.CBKS US.KSU1 Filtering commands used: cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.07 n 3 Best Fitting Double Couple Mo = 5.13e+21 dyne-cm Mw = 3.74 Z = 3 km Plane Strike Dip Rake NP1 60 57 -123 NP2 290 45 -50 Principal Axes: Axis Value Plunge Azimuth T 5.13e+21 7 173 N 0.00e+00 27 79 P -5.13e+21 62 276 Moment Tensor: (dyne-cm) Component Value Mxx 4.97e+21 Mxy -5.23e+20 Mxz -7.97e+20 Myy -1.04e+21 Myz 2.19e+21 Mzz -3.93e+21 ############## ###################### ############################ ############################## ########-------################### ###--------------------############# #---------------------------#########- -------------------------------######--- ---------------------------------###---- ------------ --------------------------- ------------ P --------------------###---- ------------ ------------------######--- -------------------------------########--- ----------------------------###########- -------------------------##############- ---------------------################# ---------------##################### ################################## ############################## ############################ ############ ####### ######## T ### Global CMT Convention Moment Tensor: R T P -3.93e+21 -7.97e+20 -2.19e+21 -7.97e+20 4.97e+21 5.23e+20 -2.19e+21 5.23e+20 -1.04e+21 Details of the solution is found at http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20150530112140/index.html |
(a) mLg computed using the IASPEI formula; (b) mLg residuals ; the values used for the trimmed mean are indicated.
(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.
The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
|
The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.
The observed and predicted traces are filtered using the following gsac commands:
cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.07 n 3The results of this grid search from 0.5 to 19 km depth are as follow:
DEPTH STK DIP RAKE MW FIT WVFGRD96 1.0 295 60 -50 3.34 0.2891 WVFGRD96 2.0 290 55 -60 3.47 0.3545 WVFGRD96 3.0 290 50 -55 3.55 0.3889 WVFGRD96 4.0 290 50 -50 3.57 0.3582 WVFGRD96 5.0 295 45 -45 3.58 0.3180 WVFGRD96 6.0 305 60 -15 3.56 0.2911 WVFGRD96 7.0 145 60 25 3.55 0.2914 WVFGRD96 8.0 145 55 25 3.60 0.2930 WVFGRD96 9.0 145 55 30 3.63 0.3082 WVFGRD96 10.0 150 55 30 3.63 0.3180 WVFGRD96 11.0 150 55 30 3.64 0.3238 WVFGRD96 12.0 150 55 30 3.65 0.3260 WVFGRD96 13.0 150 55 30 3.66 0.3262 WVFGRD96 14.0 150 55 30 3.67 0.3250 WVFGRD96 15.0 150 55 30 3.67 0.3225 WVFGRD96 16.0 150 55 30 3.68 0.3187 WVFGRD96 17.0 75 75 50 3.66 0.3139 WVFGRD96 18.0 75 75 50 3.67 0.3136 WVFGRD96 19.0 75 75 50 3.68 0.3121 WVFGRD96 20.0 75 75 50 3.69 0.3095 WVFGRD96 21.0 75 65 60 3.70 0.3089 WVFGRD96 22.0 75 65 60 3.70 0.3090 WVFGRD96 23.0 75 65 55 3.72 0.3088 WVFGRD96 24.0 75 65 55 3.72 0.3072 WVFGRD96 25.0 75 65 55 3.73 0.3050 WVFGRD96 26.0 75 65 55 3.74 0.3023 WVFGRD96 27.0 70 70 50 3.75 0.2993 WVFGRD96 28.0 70 70 50 3.76 0.2959 WVFGRD96 29.0 70 70 50 3.76 0.2916
The best solution is
WVFGRD96 3.0 290 50 -55 3.55 0.3889
The mechanism correspond to the best fit is
|
The best fit as a function of depth is given in the following figure:
|
The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).
The bandpass filter used in the processing and for the display was
cut o DIST/3.3 -30 o DIST/3.3 +70 rtr taper w 0.1 hp c 0.03 n 3 lp c 0.07 n 3
|
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure. |
A check on the assumed source location is possible by looking at the time shifts between the observed and predicted traces. The time shifts for waveform matching arise for several reasons:
Time_shift = A + B cos Azimuth + C Sin Azimuth
The time shifts for this inversion lead to the next figure:
The derived shift in origin time and epicentral coordinates are given at the bottom of the figure.
Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureas of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Iris stations and the Transportable Array of EarthScope.
The WUS model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:
MODEL.01 Model after 8 iterations ISOTROPIC KGS FLAT EARTH 1-D CONSTANT VELOCITY LINE08 LINE09 LINE10 LINE11 H(KM) VP(KM/S) VS(KM/S) RHO(GM/CC) QP QS ETAP ETAS FREFP FREFS 1.9000 3.4065 2.0089 2.2150 0.302E-02 0.679E-02 0.00 0.00 1.00 1.00 6.1000 5.5445 3.2953 2.6089 0.349E-02 0.784E-02 0.00 0.00 1.00 1.00 13.0000 6.2708 3.7396 2.7812 0.212E-02 0.476E-02 0.00 0.00 1.00 1.00 19.0000 6.4075 3.7680 2.8223 0.111E-02 0.249E-02 0.00 0.00 1.00 1.00 0.0000 7.9000 4.6200 3.2760 0.164E-10 0.370E-10 0.00 0.00 1.00 1.00
Here we tabulate the reasons for not using certain digital data sets
The following stations did not have a valid response files: