Location

2015/04/19 06:28:14 35.939 -97.345 7.9 3.9 Oklahoma

Arrival Times (from USGS)

Arrival time list

Felt Map

USGS Felt map for this earthquake

USGS Felt reports main page

Focal Mechanism

 USGS/SLU Moment Tensor Solution
 ENS  2015/04/19 06:28:14:0  35.94  -97.35   7.9 3.9 Oklahoma
 
 Stations used:
   GS.KAN10 GS.OK025 GS.OK029 GS.OK030 GS.OK031 GS.OK032 
   N4.R32B N4.U38B OK.BCOK OK.FNO OK.U32A US.MIAR 
 
 Filtering commands used:
   cut o DIST/3.3 -20 o DIST/3.3 +60
   rtr
   taper w 0.1
   hp c 0.03 n 3 
   lp c 0.07 n 3 
 
 Best Fitting Double Couple
  Mo = 1.88e+21 dyne-cm
  Mw = 3.45 
  Z  = 5 km
  Plane   Strike  Dip  Rake
   NP1      193    84   -130
   NP2       95    40   -10
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   1.88e+21     28     313
    N   0.00e+00     39     198
    P  -1.88e+21     38      68

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx     5.27e+20
       Mxy    -1.15e+21
       Mxz     1.80e+20
       Myy    -2.05e+20
       Myz    -1.41e+21
       Mzz    -3.22e+20
                                                     
                                                     
                                                     
                                                     
                     ###########---                  
                 ##############--------              
              #################-----------           
             #################-------------          
           ####   ###########----------------        
          ##### T ###########-----------------       
         ######   ##########-------------------      
        ####################----------   -------     
        ###################----------- P -------     
       ####################-----------   --------    
       -###################----------------------    
       -##################-----------------------    
       ---################----------------------#    
        ---##############----------------------#     
        -----############--------------------###     
         ------##########------------------####      
          ---------#####----------------######       
           -----------------------###########        
             -----------###################          
              ----------##################           
                 -------###############              
                     --############                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
 -3.22e+20   1.80e+20   1.41e+21 
  1.80e+20   5.27e+20   1.15e+21 
  1.41e+21   1.15e+21  -2.05e+20 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20150419062814/index.html
        

Preferred Solution

The preferred solution from an analysis of the surface-wave spectral amplitude radiation pattern, waveform inversion and first motion observations is

      STK = 95
      DIP = 40
     RAKE = -10
       MW = 3.45
       HS = 5.0

The NDK file is 20150419062814.ndk The waveform inversion is preferred.

Moment Tensor Comparison

The following compares this source inversion to others
SLU
 USGS/SLU Moment Tensor Solution
 ENS  2015/04/19 06:28:14:0  35.94  -97.35   7.9 3.9 Oklahoma
 
 Stations used:
   GS.KAN10 GS.OK025 GS.OK029 GS.OK030 GS.OK031 GS.OK032 
   N4.R32B N4.U38B OK.BCOK OK.FNO OK.U32A US.MIAR 
 
 Filtering commands used:
   cut o DIST/3.3 -20 o DIST/3.3 +60
   rtr
   taper w 0.1
   hp c 0.03 n 3 
   lp c 0.07 n 3 
 
 Best Fitting Double Couple
  Mo = 1.88e+21 dyne-cm
  Mw = 3.45 
  Z  = 5 km
  Plane   Strike  Dip  Rake
   NP1      193    84   -130
   NP2       95    40   -10
  Principal Axes:
   Axis    Value   Plunge  Azimuth
    T   1.88e+21     28     313
    N   0.00e+00     39     198
    P  -1.88e+21     38      68

 Moment Tensor: (dyne-cm)
    Component   Value
       Mxx     5.27e+20
       Mxy    -1.15e+21
       Mxz     1.80e+20
       Myy    -2.05e+20
       Myz    -1.41e+21
       Mzz    -3.22e+20
                                                     
                                                     
                                                     
                                                     
                     ###########---                  
                 ##############--------              
              #################-----------           
             #################-------------          
           ####   ###########----------------        
          ##### T ###########-----------------       
         ######   ##########-------------------      
        ####################----------   -------     
        ###################----------- P -------     
       ####################-----------   --------    
       -###################----------------------    
       -##################-----------------------    
       ---################----------------------#    
        ---##############----------------------#     
        -----############--------------------###     
         ------##########------------------####      
          ---------#####----------------######       
           -----------------------###########        
             -----------###################          
              ----------##################           
                 -------###############              
                     --############                  
                                                     
                                                     
                                                     
 Global CMT Convention Moment Tensor:
      R          T          P
 -3.22e+20   1.80e+20   1.41e+21 
  1.80e+20   5.27e+20   1.15e+21 
  1.41e+21   1.15e+21  -2.05e+20 


Details of the solution is found at

http://www.eas.slu.edu/eqc/eqc_mt/MECH.NA/20150419062814/index.html
	

Magnitudes

mLg Magnitude


(a) mLg computed using the IASPEI formula; (b) mLg residuals ; the values used for the trimmed mean are indicated.

ML Magnitude


(a) ML computed using the IASPEI formula for Horizontal components; (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.


(a) ML computed using the IASPEI formula for Vertical components (research); (b) ML residuals computed using a modified IASPEI formula that accounts for path specific attenuation; the values used for the trimmed mean are indicated. The ML relation used for each figure is given at the bottom of each plot.

Context

The next figure presents the focal mechanism for this earthquake (red) in the context of other events (blue) in the SLU Moment Tensor Catalog which are within ± 0.5 degrees of the new event. This comparison is shown in the left panel of the figure. The right panel shows the inferred direction of maximum compressive stress and the type of faulting (green is strike-slip, red is normal, blue is thrust; oblique is shown by a combination of colors).

Waveform Inversion

The focal mechanism was determined using broadband seismic waveforms. The location of the event and the and stations used for the waveform inversion are shown in the next figure.
Location of broadband stations used for waveform inversion

The program wvfgrd96 was used with good traces observed at short distance to determine the focal mechanism, depth and seismic moment. This technique requires a high quality signal and well determined velocity model for the Green functions. To the extent that these are the quality data, this type of mechanism should be preferred over the radiation pattern technique which requires the separate step of defining the pressure and tension quadrants and the correct strike.

The observed and predicted traces are filtered using the following gsac commands:

cut o DIST/3.3 -20 o DIST/3.3 +60
rtr
taper w 0.1
hp c 0.03 n 3 
lp c 0.07 n 3 
The results of this grid search from 0.5 to 19 km depth are as follow:

           DEPTH  STK   DIP  RAKE   MW    FIT
WVFGRD96    1.0   260    45   -35   3.25 0.4326
WVFGRD96    2.0   255    30   -35   3.44 0.5075
WVFGRD96    3.0    85    35   -25   3.44 0.5372
WVFGRD96    4.0    90    35   -20   3.45 0.5742
WVFGRD96    5.0    95    40   -10   3.45 0.5879
WVFGRD96    6.0    95    40   -10   3.46 0.5854
WVFGRD96    7.0    95    45   -10   3.46 0.5744
WVFGRD96    8.0    95    40   -15   3.51 0.5651
WVFGRD96    9.0    95    45   -10   3.51 0.5396
WVFGRD96   10.0   100    45    -5   3.51 0.5181
WVFGRD96   11.0   100    50     0   3.51 0.4964
WVFGRD96   12.0   100    50    -5   3.51 0.4746
WVFGRD96   13.0   100    55     0   3.52 0.4540
WVFGRD96   14.0   105    55     0   3.52 0.4354
WVFGRD96   15.0   105    55     0   3.52 0.4178
WVFGRD96   16.0   105    55     0   3.53 0.4017
WVFGRD96   17.0   105    55     0   3.53 0.3873
WVFGRD96   18.0   105    55     0   3.53 0.3753
WVFGRD96   19.0   105    55     0   3.53 0.3639
WVFGRD96   20.0   105    55     0   3.54 0.3545
WVFGRD96   21.0   105    50    -5   3.54 0.3474
WVFGRD96   22.0   105    50    -5   3.54 0.3397
WVFGRD96   23.0   105    50    -5   3.55 0.3335
WVFGRD96   24.0   105    50    -5   3.55 0.3293
WVFGRD96   25.0   105    50    -5   3.56 0.3254
WVFGRD96   26.0   105    50     0   3.56 0.3216
WVFGRD96   27.0   105    50     0   3.56 0.3200
WVFGRD96   28.0   105    50     0   3.57 0.3182
WVFGRD96   29.0   105    50     0   3.58 0.3178

The best solution is

WVFGRD96    5.0    95    40   -10   3.45 0.5879

The mechanism correspond to the best fit is
Figure 1. Waveform inversion focal mechanism

The best fit as a function of depth is given in the following figure:

Figure 2. Depth sensitivity for waveform mechanism

The comparison of the observed and predicted waveforms is given in the next figure. The red traces are the observed and the blue are the predicted. Each observed-predicted component is plotted to the same scale and peak amplitudes are indicated by the numbers to the left of each trace. A pair of numbers is given in black at the right of each predicted traces. The upper number it the time shift required for maximum correlation between the observed and predicted traces. This time shift is required because the synthetics are not computed at exactly the same distance as the observed and because the velocity model used in the predictions may not be perfect. A positive time shift indicates that the prediction is too fast and should be delayed to match the observed trace (shift to the right in this figure). A negative value indicates that the prediction is too slow. The lower number gives the percentage of variance reduction to characterize the individual goodness of fit (100% indicates a perfect fit).

The bandpass filter used in the processing and for the display was

cut o DIST/3.3 -20 o DIST/3.3 +60
rtr
taper w 0.1
hp c 0.03 n 3 
lp c 0.07 n 3 
Figure 3. Waveform comparison for selected depth. Red: observed; Blue - predicted. The time shift with respect to the model prediction is indicated. The percent of fit is also indicated.
Focal mechanism sensitivity at the preferred depth. The red color indicates a very good fit to thewavefroms. Each solution is plotted as a vector at a given value of strike and dip with the angle of the vector representing the rake angle, measured, with respect to the upward vertical (N) in the figure.

Discussion

Acknowledgements

Thanks also to the many seismic network operators whose dedication make this effort possible: University of Nevada Reno, University of Alaska, University of Washington, Oregon State University, University of Utah, Montana Bureas of Mines, UC Berkely, Caltech, UC San Diego, Saint Louis University, University of Memphis, Lamont Doherty Earth Observatory, the Iris stations and the Transportable Array of EarthScope.

Velocity Model

The WUS model used for the waveform synthetic seismograms and for the surface wave eigenfunctions and dispersion is as follows:

MODEL.01
Model after     8 iterations
ISOTROPIC
KGS
FLAT EARTH
1-D
CONSTANT VELOCITY
LINE08
LINE09
LINE10
LINE11
      H(KM)   VP(KM/S)   VS(KM/S) RHO(GM/CC)         QP         QS       ETAP       ETAS      FREFP      FREFS
     1.9000     3.4065     2.0089     2.2150  0.302E-02  0.679E-02   0.00       0.00       1.00       1.00    
     6.1000     5.5445     3.2953     2.6089  0.349E-02  0.784E-02   0.00       0.00       1.00       1.00    
    13.0000     6.2708     3.7396     2.7812  0.212E-02  0.476E-02   0.00       0.00       1.00       1.00    
    19.0000     6.4075     3.7680     2.8223  0.111E-02  0.249E-02   0.00       0.00       1.00       1.00    
     0.0000     7.9000     4.6200     3.2760  0.164E-10  0.370E-10   0.00       0.00       1.00       1.00    

Quality Control

Here we tabulate the reasons for not using certain digital data sets

The following stations did not have a valid response files:

Last Changed Mon Dec 7 00:02:40 CST 2015